//================================================================================
//
//  AppleSystemInfo.strings
//  AppleSystemInfo
//
//  Created by Steve Ko on Mon Apr 07 2003.
//  Copyright (c) 2003 Apple Computer. All rights reserved.
//
//--------------------------------------------------------------------------------

//================================================================================
//
//  The strings in this section are used to format the processor (a.k.a. CPU)
//  descriptions.
//
//--------------------------------------------------------------------------------

//================================================================================
//  String used to format a processor speed string when the processor speed is
//  less than 1 GHz.
//
//  IMPORTANT: Make sure the right hand side value contains the substring "%d".
//  "%d" will get replaced by the actual speed in units of MHz (e.g. "800").
//--------------------------------------------------------------------------------
"MHzFormat"		= "%d MHz";

//================================================================================
//  String used to format a processor speed string when the processor speed is
//  greater than or equal to 1 GHz.
//
//  IMPORTANT: Make sure the right hand side value contains the substring "%.*f".
//  "%.*f" will get replaced by the actual speed in units of GHz (e.g. "1.25").
//--------------------------------------------------------------------------------
"GHzFormat"		= "%.*f GHz";

//================================================================================
//  String used to combine the processor speed and type into a single string.
//
//  IMPORTANT: Make sure the right hand side value contains the substrings "%1$@"
//  and "%2$@".  "%1$@" will get replaced by the processor speed string
//  (e.g. "800 MHz"), and "%2$@" will get replaced by the processor type string
//  (e.g. "PowerPC G3").
//--------------------------------------------------------------------------------
"SpeedAndTypeFormat"	= "%1$@ %2$@";

//================================================================================
//  String used to describe a dual processor configuration.
//
//  IMPORTANT: Make sure the right hand side value contains the substring "%@".
//  "%@" will get replaced by the processor speed and type string
//  (e.g. "800 MHz PowerPC G3").
//--------------------------------------------------------------------------------
"2xCPUFormat"		= "Dual %@";

//================================================================================
//  String used to describe a triple processor configuration.
//
//  IMPORTANT: Make sure the right hand side value contains the substring "%@".
//  "%@" will get replaced by the processor speed and type string
//  (e.g. "800 MHz PowerPC G3").
//--------------------------------------------------------------------------------
"3xCPUFormat"		= "3 x %@";

//================================================================================
//  String used to describe a quadruple processor configuration.
//
//  IMPORTANT: Make sure the right hand side value contains the substring "%@".
//  "%@" will get replaced by the processor speed and type string
//  (e.g. "800 MHz PowerPC G3").
//--------------------------------------------------------------------------------
"4xCPUFormat"		= "4 x %@";

//================================================================================
//  String used to describe a N processor configuration where N > 2.
//
//  IMPORTANT: Make sure the right hand side value contains the substrings "%1$d"
//  and "%2$@".  "%1$d" will get replaced by the number of processors (e.g. "4"),
//  and "%2$@" will get replaced by the processor speed and type string
//  (e.g. "800 MHz PowerPC G3").
//--------------------------------------------------------------------------------
"NxCPUFormat"		= "%1$d x %2$@";

//================================================================================
//  String used to describe a unknown processor kind.
//--------------------------------------------------------------------------------
"UnknownCPUKind"	= "Unknown";

//================================================================================
//
//  The strings in this section are used to format the RAM descriptions.
//
//--------------------------------------------------------------------------------

//================================================================================
//  String used to format RAM description, when there is less than 1 GB of RAM.
//
//  IMPORTANT: Make sure the right hand side value contains the substring "%d".
//  "%d" will get replaced by the actual RAM in units of MB (e.g. "256").
//--------------------------------------------------------------------------------
"RAMInMB"		= "%d MB";

//================================================================================
//  String used to format RAM description, when there is more than 1 GB of RAM.
//
//  IMPORTANT: Make sure the right hand side value contains the substring "%.*f".
//  "%.*f" will get replaced by the actual RAM in units of GB (e.g. "1.2").
//--------------------------------------------------------------------------------
"RAMInGB"		= "%.*f GB";

//================================================================================
//  String used to format RAM description, when there is more than 1 TB of RAM.
//
//  IMPORTANT: Make sure the right hand side value contains the substring "%.*f".
//  "%.*f" will get replaced by the actual RAM in units of TB (e.g. "1.2").
//--------------------------------------------------------------------------------
"RAMInTB"		= "%.*f TB";

//================================================================================
//  String used to format RAM description, when there is more than 1 PB of RAM.
//
//  IMPORTANT: Make sure the right hand side value contains the substring "%.*f".
//  "%.*f" will get replaced by the actual RAM in units of PB (e.g. "1.2").
//--------------------------------------------------------------------------------
"RAMInPB"		= "%.*f PB";

//================================================================================
//  String used to format RAM description, when there is more than 1 EB of RAM.
//
//  IMPORTANT: Make sure the right hand side value contains the substring "%.*f".
//  "%.*f" will get replaced by the actual RAM in units of EB (e.g. "1.2").
//--------------------------------------------------------------------------------
"RAMInEB"		= "%.*f EB";